Motul Specific LL-04 5W-40 Fully Synthetic BMW Engine Oil Motor 5W40 1 Litre

Regular price £13.99

Tax included.

Brand: Motul
Type: Fully Synthetic
Application: Engine Oils
SAE Viscosity: 5W40
Compatibility: DPF Compatible
Suitable For: BMW
Quantity: 1 Litres

Full Details:
BMW LL-04 Long Life Engine Oil - ACEA C3, API SM/CF
Motul Specific LL-04 is a fully synthetic engine oil specifically designed for BMW and MINI cars fitted with EURO IV and EURO V engines (M43CNG, M47/TU2, M57TU, M57TOP, M57TU2, M67TU) that require Mid SAPS lubricants.

- For Diesel engines fitted with diesel particulate filter, Specific LL-04 must be used whatever the country. Specific LL-04 is also suitable for use into diesel engines without diesel particulate filter.

- For Petrol engines, Specific LL-04 is only recommended for use in European Union countries, Switzerland, Norway and Liechtenstein. In those countries, Specific LL-04 can be used where BMW LL-01, LL-01 FE or LL-98 is required except for M3 and M5, refer to BMW recommendation.
    
Motul Specific LL-04 meets ACEA C£ and API SM/CF specifications.
Specifications:
STANDARDS:
ACEA C3
API SN
API CF

APPROVALS: 
BMW Long Life-04 (LL-04)
Benefits:
Engines compliant with EURO IV anti pollution regulation are fitted with sensitive systems for exhaust
gas post treatment :
- Sulphur and Phosphorus inhibit catalytic convertors operation and can damage catalytic components : inefficient exhaust gas treatment.
- Sulphated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss.
BMW developed BMW LL-04 standard for "Mid SAPS" lubricants (low Sulphur, Phosphorus and Sulphated Ashes) compatible with post treatment systems. Those oils allow reaching extended drain intervals managed by computer on board.
RECOMMENDATION
Drain interval : refer to manufacturers’ recommendations and tune to your own use.
Do not mix with lubricants not BMW LL-04 compliant.
Technical Details:
Viscosity grade SAE J 300 5W-40
Density at 15°C (59°F) ASTM D1298 0.851
Viscosity at 100°C (212°F) ASTM D445 13.9 mm²/s
Viscosity at 40°C (104°F) ASTM D445 84.9 mm²/s
Viscosity index ASTM D2270 167
Pour point ASTM D97 -36°C / -33°F
Flash point ASTM D92 215°C / 419°F
TBN ASTM D 2896 7.4 mg KOH/g

x